58mm Press & Seal Cap Liners100 Safety Tamper Seals Press & Seal Foam Liners
~ 58mm ~ Foam Safety Tamper Seal This is for pressure sensitive foam seals that will fit jars with a "58mm" neck. So they work with most any jars requiring 58/400, 58/410, 58/415 or 58/425 lids. Often, these seals are a bit smaller than the stated mm size so that they can fit into the caps more easily. They will still fit on the jars / bottles whose neck size these are for since the rim is usually wide enough to accommodate that. For these, actual measurement is about 58mm We send along instructions on how to apply these seals with every order! If you're not sure of the neck or lid size or to make sure they will fit: Measure the opening of your bottle or jar first (including the rim where they will adhere to). Then add about 1.5-3mm to that measurement. If the result is about 55-56mm then order these. The key is to have a tiny little bit sticking out over the rim when you put the seal on top of the jar opening. FYI: 1 inch = 25.4mm If you're not sure you can send us a message with your measurement and we will let you know what size you need. :-) Press & seal foam liners not only give your products that extra professional edge, The seals come with "sealed for your protection" printing in red ink. Please note: These liner are NOT sticky. The discs have the adhesive embedded into them. The pressure sensitive foam liners come with adhesive embedded into one side that sticks to the bottle with the pressure used to twist the cap onto the bottle. When the cap is removed, the liner remains on the bottle. See our other listings for different sizes of seals (18mm, 20mm, 22mm, 24mm, 28mm, 33mm, 38mm, 43mm, 45mm, 48mm, 53mm, 58mm, 63mm, 70mm, 83mm, 89mm). Our liners come to us straight from the factory!
